How to Cut Steel Pipe with a Sawzall

If you’re looking for a quick and easy way to cut steel pipe, a Sawzall is the perfect tool for the job. In this blog post, we’ll show you how to cut steel pipe with a Sawzall in just a few simple steps.

Checkout this video:


A Sawzall is a valuable tool when it comes to cutting steel pipe. In fact, it’s one of the best tools for the job. They are specifically designed to cut through tough materials like metal and concrete, and they can do it quickly and easily.

There are a few things you need to keep in mind when using a Sawzall to cut steel pipe, though. First, you need to choose the right blade for the job. There are many different types of blades available, but not all of them will work well on steel pipe. You’ll need a blade that is specifically designed for cutting metal.

Second, you need to be very careful when cutting steel pipe with a Sawzall. The blades are very sharp and can easily cause serious injury if you’re not careful. Make sure you keep your fingers well away from the blade while you’re working.

Finally, always be sure to wear safety glasses when using a Sawzall. The blades can throw off sparks and debris, so it’s important to protect your eyes from these hazards.

With these tips in mind, cutting steel pipe with a Sawzall is a relatively simple task. Just be sure to take your time and use caution, and you’ll be able to get the job done safely and easily.

What You’ll Need

-A Sawzall with a steel-cutting blade
-A cutting oil
-A vise or clamp
-Measuring tape
-Pencil or marker

Sawzalling through steel pipe is a relatively easy process, but there are a few things you’ll need to make sure you have before you get started. First, you’ll need a Sawzall with a steel-cutting blade. You can find these at most hardware stores. Second, you’ll need some cutting oil. This will help lubricate the blade and keep it from over heating. Third, you’ll need a vise or clamp to hold the pipe in place while you’re cutting it. And finally, you’ll need a measuring tape, pencil or marker to mark your cut line.

Cutting the Pipe

Cutting the pipe with a sawzall is a relatively easy process. First, make sure that the sawzall is properly fitted with the correct blade. Next, mark the point where you want to make the cut. Place the blade of the sawzall at the marked point and start cutting through the pipe. Once you have cut through the pipe, remove the blade and dispose of it properly.

Deburring the Pipe

Now that you have your pipe cut to length, it’s time to deburr the edges. This is an important step, as it will remove any sharp or jagged edges that could catch on your skin or clothing. You can use a wide variety of tools for this task, but we recommend using a pipe deburring tool.

Pipe deburring tools are specifically designed for this task, and they will quickly and easily remove any sharp edges from your pipe. Simply insert the tool into the end of the pipe and twist it around a few times. The blades will cut through any burrs or sharp edges, leaving you with a smooth, safe edge.

Once you’ve deburred all of the edges on your pipe, you’re ready to move on to the next step.

Finishing Up

Now that you’ve cut your steel pipe, there are a few things you need to do in order to finish the job. First, use a file or grinder to remove any sharp edges from the cut. Next, use sandpaper to smooth out the inside and outside of the cut end of the pipe. Finally, apply a coat of primer and paint to the cut end of the pipe to protect it from rust and corrosion.

Photo of author

About the author


Leave a Comment